FAQ
Contact Us
Feedback & Complaint
Sitemap
PUBLIC
STAFFJabatan Standard Malaysia (JSM), sebagai Badan Standard Kebangsaan bertanggungjawab membangunkan Malaysian Standards (MS) seperti yang yang diperuntukkan di dalam Akta Standard Malaysia 1996 [Akta 549] berdasarkan proses pembangunan MS yang telah ditetapkan dan diiktiraf. Bagi Bil. 5/2025, terdapat:
7 Malaysian Standards (MS) (Baharu):
| Bil. | No. MS | Tajuk MS | Pautan |
|---|---|---|---|
| 1 | MS 2759 | Code of practice for good healthcare facilities management services | Papar |
| 2 | MS 2760 | Code of practice for linen and laundry services for healthcare facilities | Papar |
| 3 | MS 60335-2-3 | Household and similar electrical appliances — Safety — Part 2-3: Particular requirements for electric irons (IEC 60335-2-3:2022, MOD) | Papar |
| 4 | MS IEC 62443-2-1 | Security for industrial automation and control systems — Part 2-1: Security program requirements for IACS asset owners (IEC 62443-2-1:2024, IDT) | Papar |
| 5 | MS IEC 62443-2-4 | Security for industrial automation and control systems — Part 2-4: Security program requirements for IACS service providers (IEC 62443-2-4:2023, IDT) | Papar |
| 6 | MS IEC 62443-3-3 | Industrial communication networks — Network and system security — Part 3-3: System security requirements and security levels (IEC 62443-3-3:2013 + COR. 1:2014, IDT) | Papar |
| 7 | MS IEC 60335-2-40 | Household and similar electrical appliances — Safety — Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers (IEC 60335-2-40:2024, IDT) | Papar |
11 Malaysian Standards (MS) (Ulangkaji):
| Bil. | No. MS | Tajuk MS | Pautan |
|---|---|---|---|
| 1 | MS 2672 | Cocoa beans – Specification | Papar |
| 2 | MS 1986 | Household insecticide products – Ant bait – Chemical, physical and biological efficacy requirements | Papar |
| 3 | MS 125 | Gloss enamel paint – Specification | Papar |
| 4 | MS 1454 | Liquid polyaluminium chloride for use in potable water supply – Specification | Papar |
| 5 | MS ISO 248-1 | Rubber, raw – Determination of volatile-matter content – Part 1: Hot-mill method and oven method (ISO 248-1:2021, IDT) | Papar |
| 6 | MS ISO 2393 | Rubber test mixes – Preparation, mixing and vulcanization – Equipment and procedures (ISO 2393:2014, IDT) | Papar |
| 7 | MS ISO 124 | Latex, rubber – Determination of total solids content (ISO 124:2014, IDT) | Papar |
| 8 | MS 2716 | Electronic heating device for vapour and aerosol – Safety requirements and test methods | Papar |
| 9 | MS IEC 60335-2-9 | Household and similar electrical appliances – Safety – Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances (IEC 60335-2-9:2019, IDT) | Papar |
| 10 | MS IEC 60335-2-13 | Household and similar electrical appliances – Safety – Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances (IEC 60335-2-13:2021, IDT) | Papar |
| 11 | MS ISO/CIE 8995-1 | Light and lighting – Lighting of work places – Part 1: Indoor (ISO/CIE 8995-1:2025, IDT) | Papar |
2 Malaysian Standards (MS) (Withdrawal with Replacement):
| Bil. | No. MS | Tajuk MS | Justifikasi |
|---|---|---|---|
| 1 | MS 279 | Specification for capacitors for use in tubular fluorescent, high-pressure mercury and low-pressure sodium vapour discharge lamp circuits (First revision) | MS 279:1983 has been replaced with MS IEC 61048:2006 Auxiliaries for lamps – Capacitors for use in tubular fluorescent and other discharge lamp circuits – General and safety requirements (Second revision) (IEC 61048:1999, IDT) and MS IEC 61049:1999 Capacitors for use in tubular fluorescent and other discharge lamp circuits performance requirements (IEC 61049:1991, IDT) |
| 2 | MS 1722 | Occupational safety and health (OSH) management systems – Requirements (First revision) | MS 1722:2011 has been replaced with MS ISO 45001:2018 Occupational health and safety management systems – Requirements with guidance for use (ISO 45001:2018, IDT) and its amendment MS ISO 45001:2018/Amd 1:2024 Occupational health and safety management systems – Requirements with guidance for use – Amendment 1: Climate action changes |
32 Malaysian Standards (MS) (Withdrawal without Replacement):
| Bil. | No. MS | Tajuk MS |
|---|---|---|
| 1 | MS 2231-2 (Confirmed:2015) | Geographic information – Reference model – Part 2: Imagery |
| 2 | MS ISO 19123 (Confirmed:2015) | Geographic information – Schema for coverage geometry and functions (ISO 19123:2005, IDT) |
| 3 | MS ISO 6709 (Confirmed:2015) | Standard representation of geographic point location by coordinates (ISO 6709:2008, IDT) |
| 4 | MS ISO 14817 (Confirmed:2015) | Transport information and control systems – Requirements for an ITS/TICS central data registry and ITS/TICS data dictionaries (ISO 14817:2002, IDT) |
| 5 | MS ISO 14827-1 (Confirmed:2015) | Transport information and control systems – Data interfaces between centres for transport information and control systems – Part 1: Message definition requirements (ISO 14827-1:2005, IDT) |
| 6 | MS ISO 32000-1 (Confirmed:2015) | Document management – Portable document format – Part 1: PDF 1.7 (ISO 32000-1:2008, IDT) |
| 7 | MS ISO 9735-1 (Confirmed:2015) | Electronic data interchange for administration, commerce and transport (EDIFACT) – Application level syntax rules (Syntax version number: 4) – Part 1: Syntax rules common to all parts, together with syntax service directors for each of the parts (ISO 9735-1:1998, IDT) |
| 8 | MS ISO 9735-10 (Confirmed:2015) | Electronic data interchange for administration, commerce and transport (EDIFACT) – Application level syntax rules (Syntax version number: 4, syntax release number: 1) Part 10: Syntax service directories (ISO 9735-10:2002, IDT) |
| 9 | MS ISO 9735-2 (Confirmed:2015) | Electronic data interchange for administration, commerce and transport (EDIFACT) – Appplication level syntax rules (Syntax version number: 4) – Part 2: Syntax rules specific to batch EDI (ISO 9735-2:1998, IDT) |
| 10 | MS ISO 9735-3 (Confirmed:2015) | Electronic data interchange for administration, commerce and transport (EDIFACT) – Application level syntax rules (Syntax version number :4) – Part 3: Syntax rules specific to interactive EDI (ISO 9735-3:1998, IDT) |
| 11 | MS ISO 9735-4 (Confirmed:2015) | Electronic data interchange for administration, commerce and transport (EDIFACT) – Application level syntax rules (Syntax version number: 4) – Part 4: Syntax and service report message for batch EDI (Message type – CONTRL (ISO 9735-4:1998, IDT) |
| 12 | MS ISO 9735-5 (Confirmed:2015) | Electronic data interchange for administration, commerce and transport (EDIFACT) – Application level syntax rules (Syntax version number: 4) – Part 5: Syntax and service report message for batch EDI (Message type – Control) (ISO 9735-5:1999, IDT) |
| 13 | MS ISO 9735-6 (Confirmed:2015) | Electronic data interchange for administration, commerce and transport (EDIFACT) – Application level syntax rules (Syntax version number: 4) – Part 6: Secure authentication and acknowledgement message (Message type – AUTACK (ISO 9735-6:1999, IDT) |
| 14 | MS ISO 9735-7 (Confirmed:2015) | Electronic data interchange for administration, commerce and transport (EDIFACT) – Application level syntax rules (Syntax version number: 4) – Part 7: Security rules for batch EDI (Confidentiality) (ISO 9735-7:1999, IDT) |
| 15 | MS ISO 9735-8 (Confirmed:2015) | Electronic data interchange for administration, commerce and transport (EDIFACT) – Application level syntax rules (Syntax version number: 4) – Part 8: Associated data in EDI (ISO 9735-8:1998, IDT) |
| 16 | MS ISO 9735-9 (Confirmed:2015) | Electronic data interchange for administration, commerce and transport (EDIFACT) – Application level syntax rules (Syntax version number: 4) – Part 9: Security key and certificate management message (Message type – KEYMAN) (ISO 9735-9:1999, IDT) |
| 17 | MS 2539 | Information technology – Security techniques – Information security management guidelines for industrial automation and control system (IACS) based on MS ISO/IEC 27002 |
| 18 | MS ISO/IEC 11770-1 | Information technology – Security techniques – Key management – Part 1: Framework (First revision) (ISO/IEC 11770-1:2010, IDT) |
| 19 | MS ISO/IEC 15408-1 | Information technology – Security techniques – Evaluation criteria for IT security – Part 1: Introduction and general model (First revision) (ISO/IEC 15408-1:2005, IDT) |
| 20 | MS ISO/IEC 15408-2 | Information technology – Security techniques – Evaluation criteria for IT security – Part 2: Security functional requirements (First revision) (ISO/IEC 15408-2:2005, IDT) |
| 21 | MS ISO/IEC 15408-3 | Information technology – Security techniques – Evaluation criteria for IT security – Part 3: Security assurance components (Second revision) (ISO/IEC 15408-3:2008, IDT) |
| 22 | MS ISO/IEC 18045 | Information technology – Security techniques – Methodology for IT security evaluation (ISO/IEC 18045:2005, IDT) |
| 23 | MS ISO/IEC 27001 (BM) | Teknologi maklumat – Teknik keselamatan – Sistem pengurusan keselamatan maklumat – Keperluan (Semakan pertama) (ISO/IEC 27001:2013, IDT) (Diterbitkan oleh Jabatan Standard Malaysia pada tahun 2017) |
| 24 | MS ISO/IEC 27002 (BM) | Teknologi maklumat – Teknik keselamatan – Kod amalan untuk kawalan keselamatan maklumat (Semakan pertama) (ISO/IEC 27002:2013, IDT) (Diterbitkan oleh Jabatan Standard Malaysia pada tahun 2017) |
| 25 | MS ISO/IEC 27003 | Information technology – Security techniques – Information security management system implementation guidance (ISO/IEC 27003:2010, IDT) |
| 26 | MS ISO/IEC 27004 | Information technology – Security techniques – Information security management – Measurement (ISO/IEC 27004:2009, IDT) |
| 27 | MS ISO/IEC 27005 | Information technology – Security techniques – Information security risk management (First revision) (ISO/IEC 27005:2011, IDT) |
| 28 | MS ISO/IEC 27033-1 | Information technology – Security techniques – Network security - Part 1: Overview and concepts (ISO/IEC 27033-1:2009, IDT) |
| 29 | MS 61158-1 | Industrial communication networks – Fieldbus specification – Part 1: Overview and guidance for the IEC 61158 and IEC 61784 series |
| 30 | MS IEC 61158-2 | Industrial communication networks – Fieldbus specification – Part 2: Physical layer specifications and service definition (IEC 61158-2:2010, IDT) |
| 31 | MS IEC 61158-3-1 | Industrial communication networks – Fieldbus specifications – Part 3-1: Data-link layer service definition – Type 1 elements (IEC 61158-3-1:2007, IDT) |
| 32 | MS IEC 61158-3-2 | Industrial communication networks – Fieldbus specifications – Part 3-2: Data-link layer service definition – Type 2 elements (IEC 61158-3-2:2007, IDT) |