1 |
NSC 16 |
MS ISO 21988:2007 |
Abrasion-resistant cast irons - Classification (ISO 21988:2006, IDT) (Confirmed 2025) |
21-February-2025 |
2 |
NSC 16 |
MS ISO 3852:2010 |
Iron ores for blast furnace and direct reduction feedstocks - Determination of bulk density (First revision) (ISO 3852:2007, IDT) (Confirmed 2025) |
21-February-2025 |
3 |
NSC 16 |
MS ISO 7900:2011 |
Steel wire and wire products for fences - Zinc and zinc-alloy-coated steel barbed wire (ISO 7900:2006, IDT) (Confirmed 2025) |
21-February-2025 |
4 |
NSC 16 |
MS ISO 11534:2011 |
Iron ores - Determination of tin content - Flame atomic absorption spectrometric method (First revision) (ISO 11534:2006, IDT) (Confirmed 2025) |
21-February-2025 |
5 |
NSC 16 |
MS ISO 4691:2011 |
Iron ores - Determination of Titanium content - Diantipyrylmethane spectrophotometric method (First revision) (ISO 4691:2009, IDT) (Confirmed 2025) |
21-February-2025 |
6 |
NSC 16 |
MS ISO 5001:2014 |
Cold-reduced carbon steel sheet for vitreous enamelling (ISO 5001:2012, IDT) (Confirmed 2025) |
21-February-2025 |
7 |
NSC 16 |
MS ISO 9513:2015 |
Metallic materials - Calibration of extensometer systems used in uniaxial testing (First revision) (ISO 9513:2012, IDT) (Confirmed 2025) |
21-February-2025 |
8 |
NSC 16 |
MS ISO 6506-4:2017 |
Metallic materials - Brinell hardness test - Part 4: Table of hardness values (First revision) (ISO 6506-4:2014, IDT) (Confirmed 2025) |
21-February-2025 |
9 |
NSC 16 |
MS ISO 16120-3:2017 |
Non-alloy steel wire rod for conversion to wire - Part 3: Specific requirements for rimmed and rimmed substitute, low carbon steel wire rod (Second revision) (ISO 16120-3:2011,IDT) (Confirmed 2025) |
21-February-2025 |
10 |
NSC 16 |
MS ISO 7500-1:2018 |
Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system (First revision) (ISO 7500-1:2018, IDT) (Confirmed 2025) |
21-February-2025 |
11 |
NSC 16 |
MS ISO 6929:2018 |
Steel products - Vocabulary (First revision) (ISO 6929:2013, IDT) (Confirmed 2025) |
21-February-2025 |
12 |
NSC 19 |
MS IEC 60335-2-88:2002 (Confirmed:2013) |
Safety household and similar electrical appliances Part 2: Particular requirements for humidifiers intended for use with heating ventilation or air-conditioning systems |
28-February-2025 |
13 |
NSC 19 |
MS IEC 60721-3-5:2005 |
Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 5: Ground vehicles installations (IEC 60721-3-5:1997, IDT) |
28-February-2025 |
14 |
NSC 19 |
MS IEC 60068-2-30:2008 (Confirmed:2015) |
Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 H + 12 H Cycle) (IEC 60068-2-30:2005, IDT) |
28-February-2025 |
15 |
NSC 19 |
MS IEC 60068-2-66:2008 (Confirmed:2015) |
Environmental testing - Part 2: Test methods - Test Cx: Damp heat, steady state (Unsaturated pressurized vapour) (IEC 60068-2-66:1994, IDT) |
28-February-2025 |
16 |
NSC 19 |
MS IEC 60068-2-47:2009 |
Environmental testing - Part 2-47: Test - Mounting of specimens for vibration, impact and similar dynamic tests (IEC 60068-2-47:2005, IDT) |
28-February-2025 |
17 |
NSC 19 |
MS 62476:2011 (Confirmed:2015) |
Guidance for evaluation of product with respect to substance-use restrictions in electrical and electronic products |
28-February-2025 |
18 |
NSC 19 |
MS IEC 60929:2008 |
A.C. supplied electronic ballasts for tubular fluorescent lamps - Performance requirements (First revision) (IEC 60929:2006, IDT) |
11-March-2025 |
19 |
NSC 19 |
MS IEC 62031:2011 |
Led modules for general lighting - Safety specifications (IEC 62031:2008, IDT) |
11-March-2025 |
20 |
NSC 19 |
MS IEC 62560:2012 |
Self-ballasted led-lamps for general lighting services by voltage > 50 V - Safety specifications (IEC 62560:2011, IDT) |
11-March-2025 |
21 |
NSC 01 |
MS 2679:2017 (BM) |
Amalan pertanian baik (APB) - Pemeliharaan lebah (Tribus Apini) dan Kelulut (Tribus Meliponini) (Confirmed 2025) |
11-April-2025 |
22 |
NSC 22 |
MS 2629:2018 |
Palm Plywood - Specification |
18-April-2025 |
23 |
NSC 09 |
MS 2634:2019 |
Halal cosmetics - General requirements |
21-April-2025 |
24 |
NSC 09 |
MS 2634:2019 (BM) |
Kosmetik halal - Keperluan umum |
21-April-2025 |
25 |
NSC 19 |
MS IEC 60335-2-74:2010 |
Household and similar electrical appliances - Safety - Part 2-74: Particular requirements for portable immersion heaters (Second revision) (IEC 60335-2-74:2006, IDT) |
01-May-2025 |
26 |
NSC 19 |
MS IEC 60335-2-85:2014 |
Household and similar electrical appliances - Safety - Part 2-85: Particular requirements for fabric steamers (First revision) (IEC 60335-2-85:2008, IDT) |
01-May-2025 |
27 |
NSC 19 |
MS IEC 60335-2-73:2014 |
Household and similar electrical appliances - Safety - Part 2-73: Particular requirements for fixed immersion heaters (Second revision) (IEC 60335-2-73: 2009, IDT) |
01-May-2025 |
28 |
NSC 19 |
MS IEC 60335-2-23:2017 |
Household and similar electrical appliances - Safety - Part 2-23: Particular requirements for appliances for skin or hair care (Third revision) (IEC 60335-2-23:2012, IDT) |
01-May-2025 |
29 |
NSC 19 |
MS IEC 60335-2-27:2017 |
Household and similar electrical appliances - Safety - Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation (First revision) (IEC 60335-2-27:2012, IDT) |
01-May-2025 |
30 |
NSC 19 |
MS IEC 60335-2-45:2003 |
Household and similar electrical appliances - Safety - Part 2-45: Particular requirements for portable heating tools and similar appliances (First revision) (IEC 60335-2-45:2002, IDT) |
01-May-2025 |
31 |
NSC 14 |
MS 2640:2020 |
Rubber, vulcanised rubber - Determination of free sulphur content |
13-May-2025 |
32 |
NSC 14 |
MS ISO 18899:2016 |
Rubber - Guide to the calibration of test equipment (ISO18899:2013, IDT) |
13-May-2025 |
33 |
NSC 14 |
MS ISO 247-2:2020 |
Rubber - Determination of ash - Part 2: Thermogravimetric analysis (TGA) (ISO 247-2:2018, IDT) |
13-May-2025 |
34 |
NSC 14 |
MS ISO 4662:2019 |
Rubber, vulcanized or thermoplastic - Determination of rebound resilience (Second revision) (ISO 4662:2017, IDT) |
13-May-2025 |
35 |
NSC 14 |
MS ISO 4666-1:2012 (Confirmed:2020) |
Rubber, vulcanized - Determination of temperature rise and resistance to fatigue In flexometer testing - Part 1: Basic principles (ISO 4666-1:2010, IDT) |
13-May-2025 |