FAQ
Contact Us
Complaint & Feedback
Sitemap
PUBLIC
STAFF
Public Comment is one of the important stage in the development of Malaysian Standard (MS). The Department of Standards Malaysia (JSM) invites the public to comment on the draft MS, in line with Article 4 and Annex 3 of WTO/TBT Agreement. This includes new and revised MS, as well as the amendment and withdrawal of existing MS. All comments will be considered by the relevant Standard Development Committee (SDC) under the purview of JSM.
For more information on the public comment, please contact:
Public Comment's Team
Standardisation Division
Department of Standards Malaysia
CYBERJAYA
Email: pc[at]jsm[dot]gov[dot]my
-
No Title Download 1 Public Comment for Under Development PDF -
1 MAY 2024 – 30 JUNE 2024
1 MAY 2024 – 30 JUNE 2024
No.
Title of DMS
Scope
Link
NSC 12 - TRANSPORT
1.
DMS 1394
This Malaysian Standard establishes performance and marking requirements applicable for new pneumatic tyres for on-road usage for motor vehicles other than passenger cars, and tyres for motorcycles.
-
15 MAY 2024 – 14 JULY 2024
15 MAY 2024 – 14 JULY 2024
No.
Title of DMS
Scope
Link
NSC 23 – OCCUPATIONAL SAFETY AND HEALTH
1.
DMS ISO 45002 - Occupational health and safety management systems — General guidelines for the implementation of ISO 45001:2018 (ISO 45002:2023, IDT)
This document gives guidance on the establishment, implementation, maintenance and continual improvement of an occupational health and safety (OH&S) management system that can help organizations conform to ISO 45001:2018
-
15 JUNE 2024 – 14 AUGUST 2024
15 JUNE 2024 – 14 AUGUST 2024
No.
Title of DMS
Scope
Link
1.
DMS ISO 20658:2023 – Requirements for the collection and transport of samples for medical laboratory examinations (ISO 20658:2023, IDT) (Published by Department of Standards Malaysia in 2024)
This document specifies requirements and good practice recommendations for the collection and transport of samples intended for medical laboratory examinations.
This document is applicable to medical laboratories and service providers, which can be independent from the medical laboratory, involved in laboratory pre-examination processes that include the examination request, patient preparation and identification, sample collection and transport. It can also be applicable to some biobanks.
This document does not apply to blood and blood products intended for transfusion, e.g. red blood cells, platelets, fresh frozen plasma, but can cover the collection and transport of donor samples for testing.
-
1 MAY 2024 – 30 JUNE 2024
-
-
1 MAY 2024 – 30 JUNE 2024
1 MAY 2024 – 30 JUNE 2024
No.
MS Number
Title
NSC Approval Date
Justification for Withdrawal
NSC 07 – INFORMATION TECHNOLOGY, COMMUNICATION AND MULTIMEDIA
1.
MS ISO 17432:2012
Health informatics - Messages and communication - Web access to DICOM persistent objects (ISO 17432:2004, IDT)
22 February 2024
NSC 07/TC 13 has been disbanded and Ministry of Health Malaysia (KKM) refers to international standards that have been published by ISO/TC 215 and any other informatic standards such as ICD, HL7-FHIR and etc.
2.
MS 1903:2006 (CONFIRMED:2015)
Next generation network (NGN) realisation
22 February 2024
NSC 07/TC 13 has been disbanded and Ministry of Health Malaysia (KKM) refers to international standards that have been published by ISO/TC 215 and any other informatic standards such as ICD, HL7-FHIR and etc.
3.
MS IEC 62304:2009
Medical device software - Software life cycle processes (IEC 62304:2006, IDT)
22 February 2024
NSC 07/TC 13 has been disbanded and Ministry of Health Malaysia (KKM) refers to international standards that have been published by ISO/TC 215 and any other informatic standards such as ICD, HL7-FHIR and etc.
4.
MS ISO 12052:2012
Health informatics - Digital imaging and communication in medicine (DICOM) including workflow and data management (ISO 12052:2006, IDT)
22 February 2024
NSC 07/TC 13 has been disbanded and Ministry of Health Malaysia (KKM) refers to international standards that have been published by ISO/TC 215 and any other informatic standards such as ICD, HL7-FHIR and etc.
5.
MS ISO 17115:2009 (Confirmed:2015)
Health informatics - Vocabulary for terminological systems (ISO 17115:2007, IDT)
22 February 2024
NSC 07/TC 13 has been disbanded and Ministry of Health Malaysia (KKM) refers to international standards that have been published by ISO/TC 215 and any other informatic standards such as ICD, HL7-FHIR and etc.
NSC 19 – ELECTRICAL AND ELECTRONICS EQUIPMENT AND ACCESSORIES
1.
MS IEC 60034-6:2006
Rotating Electrical Machines - Part 6: Methods Of Cooling (IC CODE) (IEC 60034-6:1991, IDT)
1 November 2023
This MS is no longer use by the industries.
2.
MS IEC 60034-7:2006
Rotating Electrical Machines - Part 7: Classification Of Types Of Construction, Mounting Arrangements And Terminal Box Position (IM CODE) (IEC 60034-7:2001, IDT)
1 November 2023
This MS is no longer use by the industries.
3.
MS IEC 60034-8:2006
Rotating Electrical Machines - Part 8: Terminal Markings And Direction Of Rotation (IEC 60034-8:2002, IDT)
1 November 2023
This MS is no longer use by the industries.
4.
MS IEC 60034-11:2007
Rotating Electrical Machines - Part 11: Thermal Protection (IEC 60034-11:2004, IDT)
1 November 2023
This MS is no longer use by the industries.
5.
MS IEC/TS 60034-16-2:2007
Rotating Electrical Machines - Part 16: Excitation Systems For Synchronous Machines - Chapter 2: Models For Power System Studies
1 November 2023
This MS is no longer use by the industries.
6.
MS IEC/TS 60034-16-3:2007
Rotating Electrical Machines - Part 16: Excitation Systems For Synchronous Machines - Section 3: Dynamic Performance
1 November 2023
This MS is no longer use by the industries.
7.
MS IEC 60034-18-22:2007
Rotating Electrical Machines - Part 18-22: Functional Evaluation Of Insulation Systems - Test Procedures For Wire-Wound Windings - Classification Of Changes And Insulation Component Substitutions (IEC 60034-18-22:2000, IDT)
1 November 2023
This MS is no longer use by the industries.
8.
MS IEC 60034-26:2010
Rotating Electrical Machines - Part 26: Effects Of Unbalanced Voltages On The Performance Of Three-Phase Cage Induction Motors (IEC 60034-26:2006, IDT)
1 November 2023
This MS is no longer use by the industries.
9.
MS IEC 60034-4:2014
Rotating Electrical Machines - Part 4: Methods For Determining Synchronous Machine Quantities From Tests (First Revision) (IEC 60034-4:2008, IDT)
1 November 2023
This MS is no longer use by the industries.
10.
MS IEC 60034-30:2014
Rotating Electrical Machines - Part 30: Efficiency Classes Of Single-Speed, Three-Phase, Cage-Induction Motors (IE-CODE) (IEC 60034-30:2008, IDT)
1 November 2023
This MS is no longer use by the industries.
11.
MS IEC 60034-2-1:2014
Rotating Electrical Machines - Part 2-1: Standard Methods For Determining Losses And Efficiency From Tests (Excluding Machines For Traction Vehicles) (IEC 60034-2-1:2007, IDT)
1 November 2023
This MS is no longer use by the industries.
12.
MS IEC 60034-3:2014
Rotating Electrical Machines - Part 3: Specific Requirements For Synchronous Generators Driven By Steam Turbines Or Combustion Gas Turbines (First Revision) (IEC 60034-3:2007, IDT)
1 November 2023
This MS is no longer use by the industries.
13.
MS IEC 60747-2:2007
Semiconductor Devices - Discrete Devices And Integrated Circuits - Part 2: Rectifier Diodes (IEC 60747-2:2000, IDT)
1 November 2023
This MS is no longer use by the industries.
-
1 MAY 2024 – 30 JUNE 2024