Jabatan Standard Malaysia - Senarai Pengisytiharan

JADUAL

Bil.	No. MS	Tahun	Tajuk
1.	MS 2759	2025	Code of practice for good healthcare facilities management services
2.	MS 2760	2025	Code of practice for linen and laundry services for healthcare facilities
3.	MS 60335-2-3	2025	Household and similar electrical appliances — Safety — Part 2-3: Particular requirements for electric irons (IEC 60335-2-3:2022, MOD)
4.	MS IEC 62443-2-1	2024	Security for industrial automation and control systems — Part 2-1: Security program requirements for IACS asset owners (IEC 62443-2-1:2024, IDT)
5.	MS IEC 62443-2-4	2023	Security for industrial automation and control systems — Part 2-4: Security program requirements for IACS service providers (IEC 62443-2-4:2023, IDT)
6.	MS IEC 62443-3-3	2014	Industrial communication networks — Network and system security — Part 3-3: System security requirements and security levels (IEC 62443-3-3:2013 + COR. 1:2014, IDT)
7.	MS IEC 60335-2-40	2024	Household and similar electrical appliances — Safety — Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers (IEC 60335-2-40:2024, IDT)

Tahun 2025
Tarikh Kelulusan Menteri	Baharu	Semakan Semula	Penarikan Balik	Pindaan
Tarikh Kelulusan Menteri	Baharu	Semakan Semula	Penarikan Balik	Teknikal/ Editorial	Nombor MS/ Tajuk MS
04 Februari 2025	2	1	23
10 April 2025	1	1	18		1
24 Julai 2025	13	27	31
24 Oktober 2025	2	2
02 Disember 2025	7	11	34	1

JADUAL

Bil.	No. MS	Tahun	Tajuk
1.	MS 2672	2025	Cocoa beans – Specification
2.	MS 1986	2025	Household insecticide products – Ant bait – Chemical, physical and biological efficacy requirements
3.	MS 125	2025	Gloss enamel paint – Specification
4.	MS 1454	2025	Liquid polyaluminium chloride for use in potable water supply – Specification
5.	MS ISO 248-1	2021	Rubber, raw – Determination of volatile-matter content – Part 1: Hot-mill method and oven method (ISO 248-1:2021, IDT)
6.	MS ISO 2393	2014	Rubber test mixes – Preparation, mixing and vulcanization – Equipment and procedures (ISO 2393:2014, IDT)
7.	MS ISO 124	2014	Latex, rubber – Determination of total solids content (ISO 124:2014, IDT)
8.	MS 2716	2025	Electronic heating device for vapour and aerosol – Safety requirements and test methods
9.	MS IEC 60335-2-9	2019	Household and similar electrical appliances – Safety – Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances (IEC 60335-2-9:2019, IDT)
10.	MS IEC 60335-2-13	2021	Household and similar electrical appliances – Safety – Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances (IEC 60335-2-13:2021, IDT)
11.	MS ISO/CIE 8995-1	2025	Light and lighting – Lighting of work places – Part 1: Indoor (ISO/CIE 8995-1:2025, IDT)

Tahun 2025
Tarikh Kelulusan Menteri	Baharu	Semakan Semula	Penarikan Balik	Pindaan
Tarikh Kelulusan Menteri	Baharu	Semakan Semula	Penarikan Balik	Teknikal/ Editorial	Nombor MS/ Tajuk MS
04 Februari 2025	2	1	23
10 April 2025	1	1	18		1
24 Julai 2025	13	27	31
24 Oktober 2025	2	2
02 Disember 2025	7	11	34	1

JADUAL PENARIKAN BALIK TANPA GANTIAN

Bil.	No. MS	Tahun	Tajuk
1.	MS 2231-2	2009 (Confirmed:2015)	Geographic information – Reference model – Part 2: Imagery
2.	MS ISO 19123	2007 (Confirmed:2015)	Geographic information – Schema for coverage geometry and functions (ISO 19123:2005, IDT)
3.	MS ISO 6709	2009 (Confirmed:2015)	Standard representation of geographic point location by coordinates (ISO 6709:2008, IDT)
4.	MS ISO 14817	2004 (Confirmed:2015)	Transport information and control systems – Requirements for an ITS/TICS central data registry and ITS/TICS data dictionaries (ISO 14817:2002, IDT)
5.	MS ISO 14827-1	2007 (Confirmed:2015)	Transport information and control systems – Data interfaces between centres for transport information and control systems – Part 1: Message definition requirements (ISO 14827-1:2005, IDT)
6.	MS ISO 32000-1	2010 (Confirmed:2015)	Document management – Portable document format – Part 1: PDF 1.7 (ISO 32000-1:2008, IDT)
7.	MS ISO 9735-1	2000 (Confirmed:2015)	Electronic data interchange for administration, commerce and transport (EDIFACT) – Application level syntax rules (Syntax version number: 4) – Part 1: Syntax rules common to all parts, together with syntax service directors for each of the parts (ISO 9735-1:1998, IDT)
8.	MS ISO 9735-10	2004 (Confirmed:2015)	Electronic data interchange for administration, commerce and transport (EDIFACT) – Application level syntax rules (Syntax version number: 4, syntax release number: 1) Part 10: Syntax service directories (ISO 9735-10:2002, IDT)
9.	MS ISO 9735-2	2000 (Confirmed:2015)	Electronic data interchange for administration, commerce and transport (EDIFACT) – Appplication level syntax rules (Syntax version number: 4) – Part 2: Syntax rules specific to batch EDI (ISO 9735-2:1998, IDT)
10.	MS ISO 9735-3	2000 (Confirmed:2015)	Electronic data interchange for administration, commerce and transport (EDIFACT) – Application level syntax rules (Syntax version number :4) – Part 3: Syntax rules specific to interactive EDI (ISO 9735-3:1998, IDT)
11.	MS ISO 9735-4	2000 (Confirmed:2015)	Electronic data interchange for administration, commerce and transport (EDIFACT) – Application level syntax rules (Syntax version number: 4) – Part 4: Syntax and service report message for batch EDI (Message type – CONTRL (ISO 9735-4:1998, IDT)
12.	MS ISO 9735-5	2000 (Confirmed:2015)	Electronic data interchange for administration, commerce and transport (EDIFACT) – Application level syntax rules (Syntax version number: 4) – Part 5: Syntax and service report message for batch EDI (Message type – Control) (ISO 9735-5:1999, IDT)
13.	MS ISO 9735-6	2000 (Confirmed:2015)	Electronic data interchange for administration, commerce and transport (EDIFACT) – Application level syntax rules (Syntax version number: 4) – Part 6: Secure authentication and acknowledgement message (Message type – AUTACK (ISO 9735-6:1999, IDT)
14.	MS ISO 9735-7	2001 (Confirmed:2015)	Electronic data interchange for administration, commerce and transport (EDIFACT) – Application level syntax rules (Syntax version number: 4) – Part 7: Security rules for batch EDI (Confidentiality) (ISO 9735-7:1999, IDT)
15.	MS ISO 9735-8	2000 (Confirmed:2015)	Electronic data interchange for administration, commerce and transport (EDIFACT) – Application level syntax rules (Syntax version number: 4) – Part 8: Associated data in EDI (ISO 9735-8:1998, IDT)
16.	MS ISO 9735-9	2000 (Confirmed:2015)	Electronic data interchange for administration, commerce and transport (EDIFACT) – Application level syntax rules (Syntax version number: 4) – Part 9: Security key and certificate management message (Message type – KEYMAN) (ISO 9735-9:1999, IDT)
17.	MS 2539	2014	Information technology – Security techniques – Information security management guidelines for industrial automation and control system (IACS) based on MS ISO/IEC 27002
18.	MS ISO/IEC 11770-1	2012	Information technology – Security techniques – Key management – Part 1: Framework (First revision) (ISO/IEC 11770-1:2010, IDT)
19.	MS ISO/IEC 15408-1	2005	Information technology – Security techniques – Evaluation criteria for IT security – Part 1: Introduction and general model (First revision) (ISO/IEC 15408-1:2005, IDT)
20.	MS ISO/IEC 15408-2	2005	Information technology – Security techniques – Evaluation criteria for IT security – Part 2: Security functional requirements (First revision) (ISO/IEC 15408-2:2005, IDT)
21.	MS ISO/IEC 15408-3	2010	Information technology – Security techniques – Evaluation criteria for IT security – Part 3: Security assurance components (Second revision) (ISO/IEC 15408-3:2008, IDT)
22.	MS ISO/IEC 18045	2006	Information technology – Security techniques – Methodology for IT security evaluation (ISO/IEC 18045:2005, IDT)
23.	MS ISO/IEC 27001 (BM)	2013	Teknologi maklumat – Teknik keselamatan – Sistem pengurusan keselamatan maklumat – Keperluan (Semakan pertama) (ISO/IEC 27001:2013, IDT) (Diterbitkan oleh Jabatan Standard Malaysia pada tahun 2017)
24.	MS ISO/IEC 27002 (BM)	2013	Teknologi maklumat – Teknik keselamatan – Kod amalan untuk kawalan keselamatan maklumat (Semakan pertama) (ISO/IEC 27002:2013, IDT) (Diterbitkan oleh Jabatan Standard Malaysia pada tahun 2017)
25.	MS ISO/IEC 27003	2014	Information technology – Security techniques – Information security management system implementation guidance (ISO/IEC 27003:2010, IDT)
26.	MS ISO/IEC 27004	2014	Information technology – Security techniques – Information security management – Measurement (ISO/IEC 27004:2009, IDT)
27.	MS ISO/IEC 27005	2012	Information technology – Security techniques – Information security risk management (First revision) (ISO/IEC 27005:2011, IDT)
28.	MS ISO/IEC 27033-1	2012	Information technology – Security techniques – Network security - Part 1: Overview and concepts (ISO/IEC 27033-1:2009, IDT)
29.	MS 61158-1	2011	Industrial communication networks – Fieldbus specification – Part 1: Overview and guidance for the IEC 61158 and IEC 61784 series
30.	MS IEC 61158-2	2011	Industrial communication networks – Fieldbus specification – Part 2: Physical layer specifications and service definition (IEC 61158-2:2010, IDT)
31.	MS IEC 61158-3-1	2011	Industrial communication networks – Fieldbus specifications – Part 3-1: Data-link layer service definition – Type 1 elements (IEC 61158-3-1:2007, IDT)
32.	MS IEC 61158-3-2	2011	Industrial communication networks – Fieldbus specifications – Part 3-2: Data-link layer service definition – Type 2 elements (IEC 61158-3-2:2007, IDT)

JADUAL PENARIKAN BALIK DENGAN GANTIAN

Bil.	No. MS	Tahun	Tajuk	Diganti dengan
1.	MS 279	1983	Specification for capacitors for use in tubular fluorescent, high-pressure mercury and low-pressure sodium vapour discharge lamp circuits (First revision)	MS IEC 61048:2006 Auxiliaries for lamps – Capacitors for use in tubular fluorescent and other discharge lamp circuits – General and safety requirements (Second revision) (IEC 61048:1999, IDT) and MS IEC 61049:1999 Capacitors for use in tubular fluorescent and other discharge lamp circuits performance requirements (IEC 61049:1991, IDT)
2.	MS 1722	2011	Occupational safety and health (OSH) management systems – Requirements (First revision)	MS ISO 45001:2018 Occupational health and safety management systems – Requirements with guidance for use (ISO 45001:2018, IDT) and its amendment MS ISO 45001:2018/Amd 1:2024 Occupational health and safety management systems – Requirements with guidance for use – Amendment 1: Climate action changes

Tahun 2025
Tarikh Kelulusan Menteri	Baharu	Semakan Semula	Penarikan Balik	Pindaan
Tarikh Kelulusan Menteri	Baharu	Semakan Semula	Penarikan Balik	Teknikal/ Editorial	Nombor MS/ Tajuk MS
04 Februari 2025	2	1	23
10 April 2025	1	1	18		1
24 Julai 2025	13	27	31
24 Oktober 2025	2	2
02 Disember 2025	7	11	34	1

JADUAL PINDAAN (TEKNIKAL/ EDITORIAL)

Bil.	No. MS	Jenis	Tajuk
MS 1597-2-21:2019/ AMD.1:2025	Technical and Editorial	Household and similar electrical appliances – Safety – Part 2-21: Particular requirements for storage water heater (IEC 60335-2-21:2012, MOD) Amendment 1

Tahun 2025
Tarikh Kelulusan Menteri	Baharu	Semakan Semula	Penarikan Balik	Pindaan
Tarikh Kelulusan Menteri	Baharu	Semakan Semula	Penarikan Balik	Teknikal/ Editorial	Nombor MS/ Tajuk MS
04 Februari 2025	2	1	23
10 April 2025	1	1	18		1
24 Julai 2025	13	27	31
24 Oktober 2025	2	2
02 Disember 2025	7	11	34	1

JADUAL PINDAAN (NOMBOR MS/ TAJUK MS)

Bil.	Nombor dan Tajuk MS Lama	Nombor dan Tajuk MS Baharu	Catatan

Tahun 2025
Tarikh Kelulusan Menteri	Baharu	Semakan Semula	Penarikan Balik	Pindaan
Tarikh Kelulusan Menteri	Baharu	Semakan Semula	Penarikan Balik	Teknikal/ Editorial	Nombor MS/ Tajuk MS
04 Februari 2025	2	1	23
10 April 2025	1	1	18		1
24 Julai 2025	13	27	31
24 Oktober 2025	2	2
02 Disember 2025	7	11	34	1

Selamat Datang ke Portal Rasmi Jabatan Standard Malaysia

Senarai Pengisytiharan

HUBUNGI KAMI

JUMLAH PELAWAT

PAUTAN POPULAR