Jabatan Standard Malaysia

Ulasan Umum adalah merupakan salah satu peringkat penting dalam pembangunan Malaysian Standard (MS). Jabatan Standard Malaysia (JSM) menjemput semua pihak untuk mengemukakan maklumbalas/komen terhadap draf MS, selaras dengan Artikel 4 dan Annex 3 Perjanjian WTO/TBT. Ini termasuklah Malaysian Standard (MS) yang baharu, semakan semula, pindaan dan penarikan balik MS sedia ada. Kesemua komen akan dipertimbangkan oleh Jawatankuasa Pembangunan Standard yang berkaitan di bawah seliaan JSM.

public comment

Untuk maklumat lanjut mengenai ulasan umum, sila hubungi:

Pasukan Ulasan Umum
Bahagian Standardisasi
Jabatan Standard Malaysia
CYBERJAYA
E-mel: pc[at]jsm[dot]gov[dot]my

Bil	Tajuk	Muat Turun
1	Ulasan Umum untuk Standard Dalam Pembangunan	PDF

1 DISEMBER 2025 - 31 JANUARI 2026

DALAM PEMBANGUNAN
1 DISEMBER 2025 - 31 JANUARI 2026
No.	Tajuk DMS	Skop	Pautan
NSC 18 - MEDICAL DEVICES AND FACILITIES FOR HEALTHCARE
1	DMS 2761 Code of practice for facility engineering maintenance services for healthcare facilities	This document provides general requirement and principles for good healthcare facility engineering maintenance services (FEMS). This document is applicable to any assets and engineering system placed for use in any healthcare delivery organisations which requires operation and maintenance activities.	VIEW
NSC 22 - TIMBER, TIMBER PRODUCTS AND TIMBER STRUCTURES
1.	DMS 1714 Specification for visual strength grading of tropical hardwood timber (First revision)	This document specifies requirements for strength grading tropical hardwood timber visually for structural use. The system of grading is a classification of the defect system whereby the effect of various defects on the strength of the piece is taken into account. The timber shall at least be surface dry. For tropical hardwoods, visual strength grade of timber is classified as Select Structural Grade (SSG), Standard Structural Grade (ASG), Common Building Grade (CBG) and Hardwood Structural Grade (HSG).	VIEW

15 DISEMBER 2025 - 15 FEBRUARI 2026

DALAM PEMBANGUNAN
15 DISEMBER 2025 - 15 FEBRUARI 2026
No.	Tajuk DMS	Skop	Pautan
NSC 02 - CHEMICALS AND MATERIALS
1	DMS ISO 2470-1 Paper, board and pulps — Measurement of diffuse blue reflectance factor — Part 1: Indoor daylight conditions (ISO brightness) (ISO 2470-1:2016, IDT)	This part of ISO 2470 specifies a method for measuring the diffuse blue reflectance factor (ISO brightness) of pulps, papers and boards. This part of ISO 2470 is limited in its scope to white and near-white pulps, papers and boards. The measurement can only be made in an instrument in which the ultraviolet energy level of the illumination has been adjusted to correspond to the CIE illuminant C using a fluorescent reference standard. The CIE illuminant C is taken to be representative of indoor daylight conditions because it contains a suitable proportion of UV radiation. NOTE: The property called D65 brightness is measured with an instrument adjusted to correspond with CIE standard illuminant D65,[4] which has a much higher UV content than that specified in this part of ISO 2470. The measurement of D65 brightness is described in ISO 2470-2.	VIEW
2	DMS 479 Safe handling of agricultural pesticides — Code of practice	This document covers the safe handling of agricultural pesticides in accordance with the Pesticides Act 1974.	VIEW
3	DMS 428 Safety in the manufacturing and handling of synthetic pesticides — Code of practice	This document gives guidance on safety measures required in the factory for the manufacturing, formulation, packing, re-packing and handling of synthetic pesticides, including the raw material used in their manufacturing process. The document considers specific measures for safety with regard to protective measures, intoxication, hazards, and hazardous characteristics associated with synthetic pesticides.	VIEW
NSC 12 - TRANSPORT
1	DMS 828 Retro-reflective markings for motor vehicles - Specification	This Malaysian Standard specifies requirements retro-reflective marking for the fitment at the rear and side of all motor vehicles categories except L and M1 as stipulated in MS 1822. The requirements include design, colorimetric, photometric, physical and mechanical properties.	VIEW
NSC 24 - PAM OIL AND ITS PRODUCTS
1	DMS 2530-1 Minyak Sawit Mampan Malaysia (MSPO) – Bahagian 1: Prinsip am (Semakan pertama)	Standard Malaysia ini menetapkan rangka kerja bagi standard MSPO seiring dengan rantaian nilai sawit meliputi operasi penanaman sawit, kemudahan pemprosesan tandan buah segar (TBS), minyak sawit mentah, isirung sawit dan kemudahan pemprosesan produk sawit lain serta aktiviti sokongan seperti pengangkutan dan perdagangan produk sawit. Setiap bahagian khusus dalam Standard MSPO menentukan skop yang tersendiri.	VIEW
2	DMS 2530-2-1 Minyak Sawit Mampan Malaysia (MSPO) – Bahagian 2-1: Prinsip am untuk pekebun kecil persendirian (kurang daripada 40.46 hektar) (Semakan Pertama)	Standard Malaysia memperincikan keperluan Minyak Sawit Mampan Malaysia (MSPO) yang akan dijadikan panduan oleh organisasi untuk menunjukkan komitmen mereka ke arah mencapai amalan mampan. Standard Malaysia ini merangkumi aspek operasi penanaman sawit dan penghantaran produk ke pusat pengumpul/kilang sawit. Ia boleh diterima pakai dalam semua aspek yang mempengaruhi pengeluaran sawit yang boleh dipantau dan dipengaruhi oleh organisasi. Ia boleh digunakan dengan merujuk kepada Kod Amalan MPOB dan mana-mana sistem pengurusan lain yang dilaksanakan oleh organisasi.	VIEW
3	DMS 2530-2-2 Minyak Sawit Mampan Malaysia (MSPO) – Bahagian 2-2: Prinsip am untuk pekebun kecil tersusun (kurang daripada 40.46 hektar)	Standard Malaysia ini memperincikan keperluan Minyak Sawit Mampan Malaysia (MSPO) yang akan dijadikan panduan oleh organisasi untuk menunjukkan komitmen mereka ke arah mencapai amalan mampan. Standard Malaysia ini merangkumi aspek operasi penanaman kelapa sawit dan penghantaran produk ke pusat pengumpul/kilang sawit. Ia boleh diterima pakai dalam semua aspek yang mempengaruhi pengeluaran sawit yang boleh dipantau dan dipengaruhi oleh organisasi. Ia boleh digunakan dengan merujuk kepada Kod Amalan MPOB dan mana-mana sistem pengurusan lain yang dilaksanakan oleh organisasi.	VIEW
4	DMS 2530-3-1 Minyak Sawit Mampan Malaysia (MSPO) – Bahagian 3-1: Prinsip am untuk perladangan kelapa sawit (40.46 hektar hingga 500 hektar) (Semakan pertama)	Standard Malaysia ini memperincikan keperluan Minyak Sawit Mampan Malaysia (MSPO) yang akan dijadikan panduan oleh organisasi untuk menunjukkan komitmen mereka ke arah mencapai amalan mampan. Standard Malaysia merangkumi aspek operasi penanaman sawit dan penghantaran produk ke pusat pengumpul/kilang sawit. Ia boleh diterima pakai dalam semua aspek yang mempengaruhi pengeluaran sawit yang boleh dipantau dan dipengaruhi oleh organisasi. Ia boleh digunakan dengan merujuk kepada Kod Amalan MPOB dan mana-mana sistem pengurusan lain yang dilaksanakan oleh organisasi.	VIEW
5	DMS 2530-3-2 Minyak Sawit Mampan Malaysia (MSPO) – Bahagian 3-2: Prinsip am untuk perladangan kelapa sawit (keluasan melebihi 500 hektar)	Standard Malaysia ini memperincikan keperluan Minyak Sawit Mampan Malaysia (MSPO) yang akan dijadikan panduan oleh organisasi untuk menunjukkan komitmen mereka ke arah mencapai amalan mampan. Standard Malaysia merangkumi aspek operasi penanaman sawit dan penghantaran produk ke pusat pengumpul/kilang sawit. Ia boleh diterima pakai dalam semua aspek yang mempengaruhi pengeluaran sawit yang boleh dipantau dan dipengaruhi oleh organisasi. Ia boleh digunakan dengan merujuk kepada Kod Amalan MPOB dan mana-mana sistem pengurusan lain yang dilaksanakan oleh organisasi.	VIEW
6	DMS 2530-4-1 Minyak Sawit Mampan Malaysia (MSPO) – Bahagian 4-1: Prinsip am untuk kilang buah kelapa sawit termasuk keperluan rantaian bekalan (Semakan pertama)	Standard Malaysia ini memperincikan keperluan Minyak Sawit Mampan Malaysia (MSPO) yang akan dijadikan panduan oleh organisasi untuk menunjukkan komitmen mereka ke arah mencapai amalan mampan. Standard Malaysia ini merangkumi bidang operasi kilang sawit daripada tandan buah segar (TBS) kepada minyak sawit mentah (MSM), isirung sawit (PK) dan hasil sampingan pemprosesan TBS. Ia boleh diterima pakai dalam semua aspek yang mempengaruhi pengeluaran minyak sawit, yang boleh dipantau dan dipengaruhi oleh organisasi. Ia boleh digunakan dengan merujuk kepada Kod Amalan MPOB, MS 1514 – Standard Malaysia tentang Amalan Pengilangan Baik (Good Manufacturing Practice (GMP) untuk makanan dan mana-mana sistem pengurusan lain yang dilaksanakan oleh organisasi	VIEW
7	DMS 2530-4-2 Minyak Sawit Mampan Malaysia (MSPO) – Bahagian 4-2: Prinsip am untuk kemudahan pemprosesan minyak sawit termasuk keperluan rantaian bekalan	Standard Malaysia ini memperincikan keperluan Minyak Sawit Mampan Malaysia (MSPO) yang akan dijadikan panduan oleh organisasi untuk menunjukkan komitmen mereka ke arah mencapai amalan mampan. Standard Malaysia ini merangkumi bidang kemudahan pemprosesan minyak sawit daripada minyak sawit mentah dan isirung sawit kepada produk lain. Ia boleh diterima pakai dalam semua aspek yang mempengaruhi pengeluaran minyak sawit, yang boleh dipantau dan dipengaruhi oleh organisasi. Ia boleh digunakan dengan merujuk kepada Kod Amalan MPOB, MS1514 – Standard Malaysia tentang Amalan Pengilangan Baik (Good Manufacturing Practice (GMP)) untuk makanan dan mana-mana sistem pengurusan lain yang dilaksanakan oleh organisasi.	VIEW
8	DMS 2530-4-3 Minyak Sawit Mampan Malaysia (MSPO) – Bahagian 4-3: Prinsip am untuk peniaga termasuk keperluan rantaian Bekalan	Standard Malaysia ini memperincikan keperluan Minyak Sawit Mampan Malaysia (MSPO) yang akan dijadikan panduan oleh organisasi untuk menunjukkan komitmen mereka ke arah mencapai amalan mampan. Standard Malaysia ini merangkumi aspek operasi oleh peniaga-peniaga tidak termasuk peniaga biji benih kelapa sawit dan anak benih kelapa sawit serta peniaga tumbuh-tumbuhan daripada tisu kelapa sawit. Ia boleh diterima pakai dalam semua aspek yang mempengaruhi pengeluaran minyak sawit yang boleh dipantau dan dipengaruhi oleh organisasi. Ia boleh digunakan dengan merujuk kepada Kod Amalan MPOB dan mana-mana sistem pengurusan lain yang dilaksanakan oleh organisasi.	VIEW
NSC 27 - SUSTAINABLE CITIES AND COMMUNITIES
1.	DMS 2822 Star rating for industrial park (IP) - Classification	This document specifies the criteria for the assessment and scoring of industrial parks using the star rating system. This document is intended to be used as the basis to determine the star rating for industrial parks by relevant authoritative bodies as well as other interested parties. This document may also be used by industrial park managers and/or developers of industrial parks in Malaysia as a self-assessment tool. By understanding the industrial park’s present capabilities, industrial park managers and developers can prepare relevant and feasible strategies and plans for their improvement, thus providing a benchmark for excellence in industrial development while ensuring responsible stewardship of resources and environmental protection. The star rating may be used by stakeholders (e.g. government agencies, investors, etc.) as a guide for their decision-making.	VIEW

15 JANUARI 2026 - 16 MAC 2026

DALAM PEMBANGUNAN
15 JANUARI 2026 - 16 MAC 2026
No.	Tajuk DMS	Skop	Pautan
NSC 14 - RUBBER AND RUBBER PRODUCTS
1	DMS 1359-7:202X Test method for raw natural rubber — Part 7: Determination of Mooney accelerated storage hardening test (MASHT)	This Malaysia Standards specifies a method of measuring the storage hardening of raw natural rubber using the Mooney shearing disc viscometer.	VIEW
2	DMS 1359-8:202X Test methods for raw natural rubber - Part 8: Determination of Wallace accelerated storage hardening test (WASHT)	This Malaysia Standards specifies a method of measuring the Wallace accelerated storage-hardening of raw natural rubber.	VIEW
3	DMS 2820-1:202X Natural rubber field latex — Part 1: Determination of zinc content	This document specifies a method for the determination of the zinc content of natural rubber field latex by using atomic absorption spectrometry (AAS) or inductively coupled plasma-optical emission spectrometry (ICP-OES). The method is not necessarily suitable for latices preserved with potassium hydroxide, latices from natural sources other than Hevea brasiliensis, or for compounded latex, vulcanized latex or artificial dispersions of rubber and it is not applicable to synthetic rubber latices. Warning 1: Persons using this Malaysian Standard should be familiar with normal laboratory practice. This Malaysian Standard does not purport to address all of the safety and health problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to determine the applicability of any other restrictions. Warning 2: Certain procedures specified in this document might involve the substance or the generation of waste, that could constitute a local environment regulation should be made to appropriate documentation of safe handling and disposal.	VIEW
4	DMS 2820-2:202X Natural rubber field latex – Part 2: Determination of magnesium content	This document specifies a method for the determination of the magnesium content of natural rubber field latex by using atomic absorption spectrometry (AAS) or inductively coupled plasma-optical emission spectrometry (ICP-OES). The method is not necessarily suitable for latices preserved with potassium hydroxide, latices from natural sources other than Hevea brasiliensis, or for compounded latex, vulcanized latex or artificial dispersions of rubber and it is not applicable to synthetic rubber latices. Warning 1: Persons using this Malaysian Standard should be familiar with normal laboratory practice. This Malaysian Standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to determine the applicability of any other restrictions. Warning 2: Certain procedures specified in this document might involve the substance or the generation of waste, that could constitute a local environment regulation should be made to appropriate documentation of safe handling and disposal.	VIEW

Bil	Tajuk	Muat Turun
1	Ulasan Umum untuk Standard yang Ditarik Balik Tanpa Gantian	Isi Borang PDF

15 MAY 2025 - 14 JULY 2025

15 MAY 2025 - 14 JULY 2025
No.	MS Number	Title	NSC Approval Date	Justification for Withdrawal
NSC 25 – NATIONAL STANDARD COMMITTEE ON ELECTRICAL AND ELECTRONICS EQUIPMENT AND ACCESSORIES
1	MS 61158-1:2011	Industrial communication networks - Fieldbus specification - Part 1: Overview and guidance for the IEC 61158 and IEC 61784 series	10 May 2025	Technology in this MS not commonly used anymore. Industry no longer used this MS.
2	MS 61158-2:2011	Industrial communication networks - Fieldbus specification - Part 2: Physical layer specifications and service definition	10 May 2025	Technology in this MS not commonly used anymore. Industry no longer used this MS.
3	MS 61158-3-1:2011	Industrial communication networks - Fieldbus specifications - Part 3-1: Data-link layer service definition - Type 1 elements	10 May 2025	Technology in this MS not commonly used anymore. Industry no longer used this MS.
4	MS 61158-3-2:2011	Industrial communication networks - Fieldbus specifications - Part 3-2: Data-link layer service definition - Type 2 elements	10 May 2025	Technology in this MS not commonly used anymore. Industry no longer used this MS.

1 JULY - 31 AUGUST 2025

1 JULY - 31 AUGUST 2025
No.	MS Number	Title	NSC Approval Date	Justification for Withdrawal
NSC 19 – NATIONAL STANDARD COMMITTEE ON ELECTRICAL AND ELECTRONICS EQUIPMENT AND ACCESSORIES
1	MS IEC 60300-1:2010	DEPENDABILITY MANAGEMENT - PART 1: DEPENDABILITY MANAGEMENT SYSTEMS (IEC 60300-1:2003, IDT)	1/11/2023	Industry no longer used this MS.
2	MS IEC 60300-2:2010	DEPENDABILITY MANAGEMENT - PART 2: GUIDELINES FOR DEPENDABILITY MANAGEMENT (IEC 60300-2:2004, IDT)	1/11/2023	Industry no longer used this MS.
3	MS IEC 60300-3-1:2010	DEPENDABILITY MANAGEMENT - PART 3-1: APPLICATION GUIDE - ANALYSIS TECHNIQUES FOR DEPENDABILITY - GUIDE ON METHODOLOGY (IEC 60300-3-1:2003, IDT)	1/11/2023	Industry no longer used this MS.
4	MS IEC 60300-3-2:2010	DEPENDABILITY MANAGEMENT - PART 3-2: APPLICATION GUIDE - COLLECTION OF DEPENDABILITY DATA FROM THE FIELD (IEC 60300-3-2:2004, IDT)	1/11/2023	Industry no longer used this MS.
5	MS IEC 60300-3-3:2011	DEPENDABILITY MANAGEMENT - PART 3-3: APPLICATION GUIDE - LIFE CYCLE COSTING (IEC 60300-3-3:2004, IDT)	1/11/2023	Industry no longer used this MS.
6	MS IEC 60300-3-4:2011	DEPENDABILITY MANAGEMENT - PART 3-4: APPLICATION GUIDE - GUIDE TO THE SPECIFICATION OF DEPENDABILITY REQUIREMENTS (IEC 60300-3-4:2007, IDT)	1/11/2023	Industry no longer used this MS.

1 OCTOBER - 30 NOVEMBER 2025

1 OCTOBER - 30 NOVEMBER 2025
No.	MS Number	Title	NSC Approval Date	Justification for Withdrawal
NSC 19 – ELECTRICAL AND ELECTRONICS EQUIPMENT AND ACCESSORIES
1	MS IEC61047:2010	D.C. OR A.C. SUPPLIEDELECTRONIC STEP-DOWNCONVERTORS FOR FILAMENTLAMPS Â– PERFORMANCEREQUIREMENTS (FIRST REVISION) (IEC 61047:2004, IDT)	2/9/2025	Industries no longer use this MS as it is outdated.
2	MS IEC60399:2013	BARREL THREAD FOR LAMPHOLDERS WITHSHADE HOLDER RING (FIRST REVISION) (IEC60399:2008, IDT)	2/9/2025	Industries no longer use this MS as it is outdated.
3	MS IEC 60838-2-1:1999	MISCELLANEOUS LAMPHOLDERS -PART 2: PARTICULAR REQUIREMENT - SECTION 1:LAMPHOLDERS S14 (IEC 60838-2-1:1994, IDT)	2/9/2025	Industries no longer use this MS as it is outdated.

Selamat Datang ke Portal Rasmi Jabatan Standard Malaysia

Ulasan Umum

HUBUNGI KAMI

JUMLAH PELAWAT

PAUTAN POPULAR